Title |
Publisher |
Price |
This is an add-on set for the Fat Dragon Games Tavern Sets. This set includes eighteen balcony pieces, in three different styles, so you can make balconies for your tavern.
For dragonbite clips to connect your pieces together, you can find them here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
$2.99
|
This is an add-on set for the Fat Dragon Games Tavern Sets. This set includes five support posts, an empty tiny shelf and a tiny shelf with a candle that can be attached to the posts via pegs or to any village or tavern walls with peg holes in them.
These posts can support the weight of three to five tiles, clipped together, on top of them and will support a future rafter set.
You can find Dragonbite... [click here for more] |
Fat Dragon Games |
$2.99
|
This Set includes the tavern base tile to create a trapdoor using either the metal frame and standard trapdoor (as pictured on the right) from the FDG Tower of Terror set* or using the wooden frame and hidden trapdoor included in this set (shown on the left).
The hidden trapdoor has hinges and a handle on only one side of the door so when flipped over it appears as a standard tavern floor.
*The... [click here for more] |
Fat Dragon Games |
$1.99
|
This is an add-on set for the Fat Dragon Games Ultimate Tavern set. https://www.drivethrurpg.com/product/254564/DRAGONLOCK-Ultimate-Tavern-Walls-Classic-Tile?
Included in this set are freestanding straight and 45 degree angle pieces as well ones placed up against tavern wall pieces.
Clips to connect the pieces together can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346... [click here for more] |
Fat Dragon Games |
$4.99
|
This is an add-on set for the Fat Dragon Games Tavern sets.
This set includes peg holes in both the classic and clip-on tavern walls as well as a dartboard, two shelves holding bottles and an empty shelf.
For Dragonbite clips, https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346&filters=0_0_0_44593_0 ... [click here for more] |
Fat Dragon Games |
$4.99
|
This includes a large steam boiler, plus a shovel and sacks of coal. The boiler is sized so it can just barely fit inside of a house (though a larger structure or outside would make more sense). The sacks of coal could also be used for other produce, such as rice or other grains.
I'd recomend 15-20% infill for the boiler.
DRAGONBITE™ Community Creator model.
For suggested print settings,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This Barn set contains models by several of us who were active on the FDG forums for many months, in particular Arenwel, Colin, Aaron, and I. It was a wonderful time of learning for us and Arenwel was a wonderful instructor. He and Colin were the primary artists on this set, and we hope you all of the hard work and effort that went into this set.
Other sets often used for Barn Construction:
FDG Village... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is an add-on set for the Fat Dragon Games Tavern sets. This set includes 3 2" straight walls with peg holes, 4 angled walls with peg holes, a tavern corner with peg holes (without attached floor) and 2 corner edge clips with a wooden texture.
These pieces are designed so that they can connect vertically to one another to form taller rooms without needing to connect to a floor tile.
*Please... [click here for more] |
Fat Dragon Games |
$4.99
|
OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Six-gun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
\\
... [click here for more] |
Blessed Machine |
$3.00
|
This set includes 2 Dragonbite tiles with tree stumps featuring either an axe or a two-man crosscut saw, 2 freestanding tree stumps with axe and saw and a pile of 2x2" pile of logs. The pieces were made using Fat Dragon Games models and items off of Thingiverse. Check the Read me file for more information.
For suggested print settings, check out the FDG Free Starter Set: https://www.drivethrurpg.com/product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
Cowboy Boot Dice Tower. Includes removable spur. Includes separate OpenLOCK base dice corral embossed with Boot Barn.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
Attributions:
Boot created by https://www.cgtrader.com/bilrob and can be found here: https://www.cgtrader.com/free-3d-print-models/fashion/shoes/cowboy-boots-531ce6a8-a13e-4288-81d8-eac4c7b36610... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Shotgun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Lever-Action Rifle Ammunition Tracker on OpenLOCK Base
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Vintage Ammunition Box
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
This is a set tile edge clips with a wooden texture on it that can be attached to any Fat Dragon Games standard sized tile as well as the Seperate Tavern Angled Walls A and B. This set does not include any tiles, just the clips. ... [click here for more] |
Fat Dragon Games |
$1.99 $1.19
|
OpenLOCK Buffalo Rifle Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Derringer Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Tombstone Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV
... [click here for more] |
Blessed Machine |
$3.00
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is an add-on for the Fat Dragon Games Tavern Set. This set includes five angled tiles; two walls, two windows and a door with a sidewalk texture set on one side of the tile so that these tiles can connect to Fat Dragon Games sidewalks and streets.
Note: This set does not include the window inserts, shutters, door, lintil or door hinge included in either the FDG Classic Tavern Set or the Spererate... [click here for more] |
Fat Dragon Games |
$2.99
|
Dynamite Dice Vault This product is for a set of digital STLs file for use with your 3D printer. Printed at the provided size, should allow thee internal space to fit ten 16mm dice.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Westerner's Dash with OpenLOCK Ports
This product includes the STL for the main dash and 3x3 and 3x6 blank spacer bases. Ammunition Trackers, Ammunition Traysm, Card, dice, and tokens are not included in this set. OpenLOCK clips are available at printable scenery.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes two styles of wet dungeons, with a brick edge and with a rougher natural edge. These models include wet floors adjacent to dungeon walls, and they can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain water tile that matches... [click here for more] |
Fat Dragon Games |
$11.99
|
This set includes walls; A,B,C,D,D with one window, D with two windows, and D with a door. It includes the lintels for the door and windows, but you will need a Fat Dragon Games, Dragonlock Ultimate Buildings set to get the actual door, and windows. Each wall has fieldstone on one side, and wooden interior walls on the other. That way, they are not only reversable, but also show a different interior... [click here for more] |
Fat Dragon Games |
$4.99
|
Professionally designed 3D model.
You get an .STL file for the tent, stump, every separate piece of the spit, the sleeping bag, the camp fire, and the log bench
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
... [click here for more] |
Rocket Pig Games |
$7.88
|
Lantern Ornament
This product is for a set of digital STLs file for use with your 3D printer. The base is designed to allow passing a typical incandescent Christmas tree light bulb into the lantern for extra fun.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. ... [click here for more] |
Blessed Machine |
$3.00
|
Spittoon Saloon Dice Tower. Includes removable spur.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Spittoon Spend Round Container/Dice Tower
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on natural-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set includes windowed walls from Fat Dragon Games Village sets 1,2, and 3, and also double sided walls windows. They have been modified to allow the shutters to open, and also include shutters remixed from FDG Village sets 1,2,and 3. This set does not include any windows, you will need the village sets for those. You can put a window on the inside of the sil, and a shutter on the outside. Wooden... [click here for more] |
Fat Dragon Games |
$7.95
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$15.00
|
Water Tower Dice Tower.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Professionally designed 3D model.
You get an .STL file for a Chest
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.88
|
OpenLOCK Crossbow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$4.00
|
Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own.
See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$2.00
|
POSSIBLY TRAPPED CHEST Modelled by Ben Gallego
3D STL File package containing 3d printable miniature models of a "possibly" trapped chest. This package includes 2 models; one with base (40mm) and one without. The chest stands at 16mm with the base. It has a fairly high poly count allowing it to be scaled up to larger sizes. We make no guarantees that this chest is not trapped.... [click here for more] |
Escape Games |
$1.00
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$7.50
|
A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 15% for all models recommended, 5% minimum
Top/Bottom... [click here for more] |
Fat Dragon Games |
$7.99
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
Minimum printbed needed is 15 x 15 cm and 15 cm high.
If you need a printed Version, please write us a email.
All files are not for commercial use!... [click here for more] |
ESLO |
$6.95 $4.95
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$10.05
|
It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path.
Included Models:
Recommended Print Settings:
Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$7.50
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.50
|
This set contains the Basic Set to create a fantasy Orc Fort :
Of course you can use the palisade-walls also for medieval fortifications, tribal villages, frontier forts and stuff like this.
An alternative gate is separately available, other modells will come in future.
The set consits of STL-Files, made for 3D printing, to used at table-top-gaming scale 1:72, but can easily been scaled to... [click here for more] |
Xerbath |
$10.00
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$30.00
|
This set contains a Medieval Watchtower to find its place in table-top-games as stand alone object,or part of a medieval fortification, tribal villages, frontier forts and stuff like this.
It consits of STL-Files, made for 3D printing, in 28mm (1:64) and 25mm (1:72) scale. ... [click here for more] |
Xerbath |
$3.99
|