| Title |
Publisher |
Price |
A stony gargoyle perfect for your tabletop gaem! Print each piece with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
That is a hit, Shaken but no Wound! Shaken Pointers to print to mark when your minis are Shaken. For your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Shaken Pointer (Text)
Shaken Pointer (S)
The Full Text Shaken Pointer measures 2.5 inches long, 0.325 inches wide and 0.167... [click here for more] |
Pinnacle Entertainment |
Pay What You Want
|
An chimera perfect for your tabletop game! Print with supports and a brim.... [click here for more] |
mz4250 |
Pay What You Want
|
Running a scary campaign? Why not add some bats?
In this collection you get a regular sized bat, which is very small, and a giant bat that can be used as a mount.
Print them with supports and a raft. Print the stands with clear material if possible. Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|
A Wraith, perfect for your tabletop game!
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
Included in this free bonus to the Tycho City mega set is a battery powered tealight capable Airbender statue. Originally crafted by prolific thingiverse artist OrangeWine, this statue has been carved out to allow a tealight to shine through in multiple areas.
Airbender Display by tychocity on Sketchfab
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A Ogre Mage, perfect for your tabletop game!
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
This FREE set of miniatures contains 20 models of our Gremlin Warband. These models are available both Presupported for Resin Machines and unsupported for your own supports. The Gremlins of Aach’yn are nasty little buggers. The natural enemies of the Dwarves with whom they compete for techno-magical mastery. They can be found all over the world and the Sky Islands beyond in settlements, workshops,... [click here for more] |
Aether Studios |
Pay What You Want
|
I needed a long rectangular chimney for my project. The regular square versions just weren’t cutting it. Thus “skinny chimney” was born. The chimney is not hollow. The hole in the top just goes down a short way for artistic look. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A double wide timber post and a solid center post. I made these for my friend, Lou Anders becuase he had a need for them. The double wide post is good for shoring up wall connections. The center post is good for a support in a large room. The picture shows the double wide post. Both use the rounded pegs to secure them to floor tiles.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Multisided pawn base files for STL (3D printing). Never lose track of your pawns again!
These free, 3D printable (STL) pawn bases allow you to have 5 identical pawns and know which one is attacking or being hit. Easier and clearer than paint or numbers.
Includes the STL file for a set of square, circle, pentagon, hexagon, and octagon pawn bases. ... [click here for more] |
Menagerie Press |
Pay What You Want
|
A free set of our alien lair terrain! This terrain series is the culmination of 3 years of work by the staff of Aether Studios. Every single tile is equipped for LED lights underneath. Everything you need to get started making complete rooms is included. If you like the set, there are many expansions to check out! Unfortunately, DTRPG doesn't care to provide a proper Image Server. You'll have to check... [click here for more] |
Aether Studios |
Pay What You Want
|
What's an underwater campaign without a killer whale or two?
Print the pieces with supports and a raft. Print the stand with clear material if possible. Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|
An cockatrice perfect for your tabletop game! Print with supports and a brim.... [click here for more] |
mz4250 |
Pay What You Want
|
25mm round body markers for use as unrisen zombies, killed enemies, or whenever you need a corpse ... [click here for more] |
3DModels |
Pay What You Want
|
5 simple stalagmites on 50mm bases for monsters to hide behind in your caves! ... [click here for more] |
3DModels |
Pay What You Want
|
Snaaaake a Snaaaake! OOOOOOHHH ITS A SNAAAAAKKEEE!!!
To compliment the badger collection why not add some snakes to your tabletop game? This collection has snakes of all sizes, from really small poisionous snakes to massive giant constrictor snakes! Print as it with supports and a brim or raft!... [click here for more] |
mz4250 |
Pay What You Want
|
A pegasus, perfect for your tabletop game!
Print with supports and a brim or raft. Print the wings with the feathers facing up and use a raft with supports. Print the body upside down. ... [click here for more] |
mz4250 |
Pay What You Want
|
A Nightmare, perfect for your tabletop game! Unleash this horror of the dreamscape on your players!
Print the body upside down with supports and a brim or raft. Print the head as is with supports. Use clear material for the stand if possible. ... [click here for more] |
mz4250 |
Pay What You Want
|
Its a Lich, 3D printable and perfect for your tabletop game! Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
Its a Manticore, 3D printable and perfect for your tabletop game! Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
Its my collection of dinosaur minis, 3D printable and perfect for your tabletop game! Bring these prehistoric terrors into your game and bring a new level of fear to your players!
Print each piece with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
This STL files for 3D Printers creates a hex pattern for XPS foam. Each hex should be about 31/32 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
DragonBite-compatible terrain tiles are optimized for clean, support-free 3D prints. On some printers, though, pood bed adhesion can result in curled corners and even ruined prints. Turning on "brims" that anchor the tile to the print surface can solve that problem, but removing them can be a pain. These pre-positioned dots anchor just the corners of DragonBite compatible tiles to the print... [click here for more] |
Nerdhaus Industries |
Pay What You Want
|
Spiders! We all need them in campaigns. Well here is a giant spider and giant wolf spider ready for your tabletop game!
Print them as is with supports everywhere and a raft. Enoy!... [click here for more] |
mz4250 |
Pay What You Want
|
An centaur perfect for your tabletop game! Print each piece as flas as possible with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
A simple spider web that prints without support for use in your game, sized to 40mm to fit open forge and most other terrain types, resizable in your slicer if necessary. 2 mirrored webs that can be used seperately or glued together for greater stablility. Adapted from a design by MakeALot. ... [click here for more] |
3DModels |
Pay What You Want
|
Need some boars for your game? Well here they are!
In this collection you have a wild boar and giant boar, perfect for your dwarven or barbarian mounts!
Print them with supports and a raft. Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|
A Troglodyte, perfect for your tabletop game!
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
A Wight, perfect for your tabletop game!
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
A harpy model ready for your tabletop game! Be sure to use lots of supports and a brim on this one. Its not an easy print. ... [click here for more] |
mz4250 |
Pay What You Want
|
Gravestone for Tabletop or Boardgames ... [click here for more] |
3D-Druck-Gayer |
Pay What You Want
|
Lions, Tigers, and bigger Tigers oh my!
In this colletion you have some large cats to add to your games which include:
Lion (male)
Tiger
Panther
Saber Tooth Tiger
Print them as is with supports and a raft. The tiger heads should be printed looking up. ... [click here for more] |
mz4250 |
Pay What You Want
|
Meet the queen of the Chromatic Dragons, Tiamat! This collection has her various pieces that you can print with supports and a raft. There is also one massive one piece print, but you'd have to be exceptoinally brave to print that sucker. Enjoy! ... [click here for more] |
mz4250 |
Pay What You Want
|
IF YOU ARE SEEING THIS ITEM FOR SALE ON A SCAM SITE, DON'T BUY IT, YOU CAN GET IT FOR FREE AT THE WARGAME VAULT - www.wargamevault.com
These files are Creative Commons for your personal (NON-COMMERCIAL) use only CC BY-NC-SA 4.0.
Two options for the price of one! "Quick and Durty" multi-part explosion markers. PDF, AI and SVG patterns for producing 3D laser cut parts... [click here for more] |
Yellow Sign Studio |
Pay What You Want
|
Wargaming ruler designed for use with Kill team from GW, which is why there are the shaped cut outs on 4 of the sides - each corresponding to the new distance icons. Each side is labelled with a number, and that number corresponds to the length of that edge in inches. Naturally, because each edge is numbered this can easily be used for any other games where measuring in inches is required. The longest... [click here for more] |
Fromthelab |
Pay What You Want
|
Badger badger badger badger badger badger badger ... MUSHROOM MUSHROOM!!!
Need some badgers in your tabletop game? Look no further! Its a regular one and a giant badger in case your druid wants a sweet ride. Print as it with supports and a brim or raft!... [click here for more] |
mz4250 |
Pay What You Want
|
Jungle encounter? Why not throw in some apes?! This set includes a baboon, gorilla, and Kong sized giant gorilla!
You can print these as is with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
The Roc, a terror of the skies, is now 3D printable and ready to be unleashed on your tabletop game!
Print with supports and a brim or raft. The body prints well on its back. The wings print well with the feathers facing straight up. The stand should be printed with clear material if possible. ... [click here for more] |
mz4250 |
Pay What You Want
|
A pack of 5 objectives for 3D printing for your Sci Fi wargames and role playing games. It includes a hatch, two ammo crates, a console and an embryo storage unit. ... [click here for more] |
Thunder Chrome |
Pay What You Want
|
Its a horrible mummy, perfect for your tabletop game! Add that extra level of creepiness to your rpg experience!
Print with supports and a brim. He prints well on his back.... [click here for more] |
mz4250 |
Pay What You Want
|
The epic skyship from our 5th Kickstarter, the Nautiloid, has arrived! This ship was sculpted by Károly Csúrgó as the premiere reward for the campaign.
... [click here for more] |
Aether Studios |
Pay What You Want
|
ICRPG distance banana to measure distances during the game, in proper ICRPG fashion.
Printing Instructions:
Print at maximum layer height and at the highest speed you can. It is a simple thing to print. For two color prints, change filament at the right layer. Alternatively, you can print it single color and then paint it of course.
The default size is around 30cm,... [click here for more] |
Khanist Games |
Pay What You Want
|
D6 direction die for your games.
Use this to determine wind direction etc. without having to roll a regular D6 or D8 and figuring out which number is which direction.
Printing Instructions:
The default size of the die is 14.4 mm, which is an integer multiple of 0.16 mm Layer Height and is a good size for a die. Since all the faces are the same,... [click here for more] |
Khanist Games |
Pay What You Want
|
An banshee perfect for your tabletop game! Print with supports and a brim.... [click here for more] |
mz4250 |
Pay What You Want
|
Its an Orc perfect for your tabletop game! Print the body on his back or standing with supports and a brim. Print the axe as flat as possible. ... [click here for more] |
mz4250 |
Pay What You Want
|
A Spectre, perfect for your tabletop game!
This version just has a spirt body rather than legs.
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
A sultry Succubus perfect for your tabletop game!
This is not an easy print so proceed with caution.
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
You're walking in the woods.
There's no one around and your phone is dead.
Out of the corner of your eye you spot him:
Shia LaBeouf!
Its Actual Cannibal Shia LaBeouf, now ready for your tabletop game!
Based off the internet classic: https://www.youtube.com/watch?v=o0u4M6vppCI
And here is a write up for your 5e game: http://imgur.com/GyFxCFn
Print him with supports and... [click here for more] |
mz4250 |
Pay What You Want
|
Magmuk- Free/Pay What You Want 3D Print File for Mutant Romp! Encounter This product contains 2 3d print files (STL) for the Magmuk. This maggot like humanoid scavenger is a staple encounter found in the Mutant Romp! TTRG core system game book. This file is being offered as free/pay what you want to help Mutant Romp! owning GMs build up their collection of 3d printable encounter files.... [click here for more] |
Fishwife Games |
Pay What You Want
|
Log In 
