| Title ▼ |
Publisher |
Price |
![Woodlands Bundle [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/images/346/319748-thumb140.jpg)
This special bundle product contains the following titles. Woodland Cliff Set Regular price: $14.99 Bundle price: $10.49 Format: STL (3D Model) This set is designed to be used with the Woodland Core Set. All tiles are 4x4. The cliffs are 4" tall and with the correct risers can be used to multi-leveled cliffs and cave entrances. Additionally, if you have the Woodland... [click here for more] |
Fat Dragon Games |
$84.94 $59.46
|
This set provides a wagon/horse trail to be used with the Woodland Core, Hillside and Elevation Sets. All tiles are 4x4. Enjoy!
Set Preview Link:
Forest Trails
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum with adaptive layer settings at .1 best and .01 variance
Optimal Infill: 10% (5% works, but there will be an occasion small pit or hole) ... [click here for more] |
Fat Dragon Games |
$9.99
|
Excited to offer this capstone to the Woodland, Hillside, and Riverside Sets. The Woodland Stream set offers a dynamic modular stream system for varying elevations meant to integrate with the other outdoor sets. All tiles are 4x4. Check out this preview:
Woodland Streams Preview
Print Recommendations: Use the FDG terrain profile for the best results. ... [click here for more] |
Fat Dragon Games |
$14.99
|
This set works as a stand-alone set, ideal for hillsides and plains with small clusters of trees. All tiles are 4x4. This set comes with 25 unique tiles. This set is designed to be utilized with the other Woodland and Riverside sets.
NOTE: This set does not include the Tree Tops. FDG Tree Set required. Set is playable without tops.
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
Love the outdoor sets, but wish you could cut down on printing and integrate with battle maps and mats? Well, now you can. Included in this set are edge pieces for each of the three outdoor sets and other 4x4 FDG tiles allowing for seamless integration with battle mats. Check out the following previews, enjoy:
Woodland Hillside Riverside Preview
Print Settings: I recommend using the official FDG terrain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set is designed to go with the Woodland Core Set and Woodland Cliff Set, although it can be used on its own. All tiles are 4x4 and includes the removable tree tops to make a thick forest more visible during gameplay. The tiles are designed in a way that preserves the grid without adding obnoxious lines. This set comes with 31 unique tiles. Printing just 1 of each tile provides over 3 square feet... [click here for more] |
Fat Dragon Games |
$14.99
|
I am so excited to offer this set! I got sick of having loose scatter on a battle mat and so decided to make an FDG community forest tile set. All tiles are 4x4 anddesigned in a way that preserves the grid without adding obnoxious lines. This set comes with many unique tiles. Printing just 1 of each tile provides over 3 and half square feet of play. When combine the other Woodland and Riverside sets,... [click here for more] |
Fat Dragon Games |
$19.99
|
This set is designed to be used with the Woodland Core Set. All tiles are 4x4. The cliffs are 4" tall and with the correct risers can be used to multi-leveled cliffs and cave entrances. Additionally, if you have the Woodland Elevation Set, this comes with additional transition tiles from elevated forest floors to cliffs. The tiles are designed in a way that preserves the grid without adding obnoxious... [click here for more] |
Fat Dragon Games |
$14.99
|
These 2x2 risers are designed to support the 4x4 Woodland and Riverside sets, including the new Riverside Waterfalls Set. Some of the cliffs and falls have unique heights. This set should provide proper support with any combination. These risers should support most FDG 4x4 tiles.
See Preview Here:
Recommended Print Settings are .2mm layer height and 10% infill, using the FDG terrain profile.
Cheers!... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
WOODLAND ADVENTURES allows you to create massive wooded layouts, quickly and easly, while offering our exclusive FOLD-FLAT tree designs for easy storage.
This product requires Adobe Acrobat Reader (free download) to use.
This set includes:
• Log bridge
• Bushes
• Giant dragon statue
• Druid shrine
• Fairy circle
• Hunting/ambush blind
• Leanto
• Owlbear nest
• Ruins... [click here for more] |
Fat Dragon Games |
$16.00 $12.00
|
Winterhawk Tower Ruins provides you with everything you need to make multi-level modular ruined tower. Utilizing our exclusive E-Z LOCK terrain system, your builds can be dissasembled for easy storage and rerranged for new construction designs as desired. The floor tiles are available with gridless, 1" and 1.5 inch grids, and layer options allow you to fully customize your models before printing. ... [click here for more] |
Fat Dragon Games |
$5.99 $1.50
|
Winterhawk Ruins provides you with everything you need to make multi-level modular ruined buildings and structures. Utilizing our exclusive E-Z LOCK terrain system, your builds can be dissasembled for easy storage and rerranged for new construction designs as desired. The floor tiles are available with 1" and 1.5 inch grids, and layer options allow you to fully customize your models before printing. ... [click here for more] |
Fat Dragon Games |
$7.99 $2.00
|
Winterhawk Outpost Ruins provides you with everything you need to make multi-level modular ruined terrain. Utilizing our exclusive E-Z LOCK terrain system, your builds can be dissasembled for easy storage and rerranged for new construction designs as desired. The floor tiles are available with gridless, 1" and 1.5 inch grids, and layer options allow you to fully customize your models before printing.... [click here for more] |
Fat Dragon Games |
$6.99 $1.75
|
WINTERHAWK CHURCH is the latest addition to our growing 'Fold Flat' terrain system. Designed to come apart and have the majority of parts fold flat for easy storage and transport, the Winterhawk Church features user selectable graphic options that allow you to customize your model before printing.
This product requires Adobe Acrobat Reader (free download) to use.
This set includes:
• 28mm scale... [click here for more] |
Fat Dragon Games |
$4.99 $1.25
|
The Winterhawk Cemetery brings an all new dimension to common flat 2D cemetery terrain with the addition of open, 3D graves you can place miniatures in! Layer options make it easy to customize your models before printing, swapping window sizes, adding snow to the ground tiles, and much more. This set includes: • Chapel • Mausoleum • Headstones (over 175 unique versions!) • 4" hedge fence... [click here for more] |
Fat Dragon Games |
$9.99 $2.50
|
WINTER ADVENTURES allows you to create massive winter layouts, quickly and easly, while offering our exclusive FOLD-FLAT tree designs for easy storage.
This product requires Adobe Acrobat Reader (free download) to use.
This set includes:
• Bare tree (simple)
• Bare tree (complex)
• Coniferous tree
• Wooden bridge
• Snow/Ice bridge
• Snow/Ice caverns
• Waterfall
• Outdoor... [click here for more] |
Fat Dragon Games |
FREE
|
Fat Dragon's Dragonshire window lintel modified to have a post to hang signs. I also made a couple of common signs. The signs and the little crochets can be printed with a fdm printer if it is well dialed-in. My is not so I get much better result with my resin printer.
https://imgur.com/gallery/EqYBj2y
Update (2021-04-25)
I have made two versions that works with Aether Studios signs. One with my... [click here for more] |
Fat Dragon Games |
$1.00
|
Included in this set are 35 tiles to expand your FDG Caverns. These tiles were designed by Tim as part of my Patreon and remixed from both the revised and legacy caverns, as well as the water tile from Dungeon Hazards, Skull Entrance, and the very awesome Terrain4Print rock formations released under the CC-AO license.
... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on natural-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on brick-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes two styles of wet dungeons, with a brick edge and with a rougher natural edge. These models include wet floors adjacent to dungeon walls, and they can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain water tile that matches... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain brings watery pools and streams to dungeon layouts. It includes two styles of wet dungeons, one with a brick edge and another with a rougher natural edge.
The plain water tile that matches the water texture used in this set can be found in FDG Dungeon Hazards & Traps.
Sample layouts in each style:
Recommended Print Settings:
Layer Size:... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL models continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes models for two styles of wet dungeons, one with a brick edge and one with a rougher natural edge. These models include water flowing through various doors, archways, and wall cracks, connecting pools in adjacent rooms. They can be mixed with other Wet Dungeons... [click here for more] |
Fat Dragon Games |
$12.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge with... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls and floors. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. However, this set uses the original wavy-style water,... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! (Just as Wet Caverns 2: Wavy Walls did for full-height walls.) Now you can create underground rivers, pools, and lakes up close to low cavern walls and entrances. These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between! These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors)
These lower corridors are:
Faster to print
Easier to see over
Easier to place miniatures... [click here for more] |
Fat Dragon Games |
$9.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! Now you can create underground rivers, pools, and lakes up close to lower walls and entrances. Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts!
Why half-height walls? These lower walls are:
Faster to print
Easier... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are:
Faster to print
Easier to see over
Easier to place miniatures close to -- especially important for tight corridors!
These corridors work well with both half-height... [click here for more] |
Fat Dragon Games |
$9.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections! (The sample layout... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.
(If you want the same models with wavy water... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles.
These tiles are based on the original FDG style of caverns.
If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2.
Both styles look great, just pick the one that best fits the rest of your cavern prints!
Wet... [click here for more] |
Fat Dragon Games |
$12.99
|
I am happy to offer this cavern deck expansion. This set includes all the tiles necessary to run decks along the waterline and over the water. This set can easily double as a dock set. Check out the preview below and enjoy!
Set Preview:
:lang="en">Wet Cavern Decks
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well.... [click here for more] |
Fat Dragon Games |
$9.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge... [click here for more] |
Fat Dragon Games |
$10.99
|
A set of dragonbite tiles that can be used as any of water, grass, or snow, depending on how you paint them. Included are 2x2, 2x4, and 4x4 tiles.
All can be printed support-free!
The texture used on the tiles is a modified version of a texture created by theprometh on thingiverse.com, which was released under the Creative Commons Attribution license. ... [click here for more] |
Fat Dragon Games |
$5.00
|
Included in this set of 3d Printable terrain you will find 21 .stl files for creating Voronoi floor dungeons. These models are compatible with all other dungeon terrain. The models in this set were originally released in Voronoi Stone Dungeons. They have been updated to the latest Dragonbite base, reworked for printability, and expanded with 8 new models.
... [click here for more] |
Fat Dragon Games |
$3.99
|
This set includes windowed walls from Fat Dragon Games Village sets 1,2, and 3, and also double sided walls windows. They have been modified to allow the shutters to open, and also include shutters remixed from FDG Village sets 1,2,and 3. This set does not include any windows, you will need the village sets for those. You can put a window on the inside of the sil, and a shutter on the outside. Wooden... [click here for more] |
Fat Dragon Games |
$7.95
|
Keep the beasties away at night and create atmosphere with this set of Fire Poles for your campaigns.
These Fire Poles are hollowed out and can accept small led lights. Two are made to be used in grass or dirt settings and two are made to go with the "City Streets" set. ... [click here for more] |
Fat Dragon Games |
$1.50
|
My take on Colin's steampunk lantern wall to give it a more victorian look. Also added holes from the back to insert LED's into the lanterns. I used a LED micro strip so that I could string several walls together.
Here is one example:
https://www.amazon.com/Battery-Powered-ITART-Christmas-Wedding/dp/B01FB1CHHQ/ref=sr_1_9?s=hi&ie=UTF8&qid=1533341665&sr=1-9&keywords=20+micro+led+string... [click here for more] |
Fat Dragon Games |
$0.99
|
![Ultimate Treasure Bundle [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/images/346/338471-thumb140.jpg)
This special bundle product contains the following titles. Cavern Treasure Set Regular price: $9.99 Bundle price: $8.99 Format: STL (3D Model) Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Cavern Treasure set that has all you need, but is recommended to pair with the... [click here for more] |
Fat Dragon Games |
$49.95 $44.96
|
![Ultimate Outdoor Bundle [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/images/346/319746-thumb140.jpg)
This special bundle product contains the following titles. Riverside Cliff Set Regular price: $9.99 Bundle price: $5.99 Format: STL (3D Model) The Riverside Cliff set is designed to integrate with the Riverside Core and Elevation Set and Woodland Sets to provide a more immersive outdoor battleground. This set comes with 18 unique 4x4 tiles. When combined with the... [click here for more] |
Fat Dragon Games |
$146.88 $88.13
|
This expansion includes LED tiles to compliment the existing Necromancer Lair set. Additionally, a special 4x4 dais with two new insertables (Hand Mage scrying pool and brazier) and other variations.
... [click here for more] |
Fat Dragon Games |
$14.99
|
Log In 
