Title |
Publisher |
Price |
The Megahexes 1.5” Base Set is a set of 16 3D-printable STL models designed for games using a hex grid.
The hexagons are 1.5” center-to-center, and the hexagon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in the set) requires a build footprint of approx. 4-3/8” x 4-5/8” (110mm x 115mm).
The models make use of the DragonbiteTM... [click here for more] |
Decagon Design |
Pay What You Want
|
This set includes 2 Dragonbite tiles with tree stumps featuring either an axe or a two-man crosscut saw, 2 freestanding tree stumps with axe and saw and a pile of 2x2" pile of logs. The pieces were made using Fat Dragon Games models and items off of Thingiverse. Check the Read me file for more information.
For suggested print settings, check out the FDG Free Starter Set: https://www.drivethrurpg.com/product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A "separate wall" style archway for Dragonbite. Remixed from the archway in DRAGONLOCK™ ULTIMATE: DUNGEON EXPANSION SET 3 FDG0166.
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and/or other authors. Such material... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A timber frame post, with flickering LED lantern, remixed from Fat Dragon Games' village set.
Includes assembly instructions.
Skills Required
3D Printing, novice
Soldering, intermediate
Basic electronic assembly
Tools and Materials Required
Superglue (I use Gorilla Glue Gel)
3mm LED (plain or flickering)
CR1632 battery
22 Gage solid core wire
Wire cutters / strippers
Soldering... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Andrew Callaghan requested a wood floor version of the FDG Dragonshire Building 2 Bumpout. Here they are for bumpout A, B and C. Requires Fat Dragon Games Dragonshire Building set
Dragonshire Builing Set 1:
https://www.drivethrurpg.com/product/324779/DRAGONLOCK-Dragonshire-Building-Set-1?affiliate_rem=553084
Dragonshire Building Set 2:
https://www.drivethrurpg.com/product/324781/DRAGONLOCK-Dragonshire-Building-Set-2?affiliate_rem=553084... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
The Megahexes 1.5” Expansion Set 1 has 41 3D-printable STL models that enhance the Megahexes 1.5” Base Set, adding risers to support elevated terrain, some megahex-sized terrain features, and hex-to-square-grid connectors.
The hexagons are 1.5” center-to-center, and the hexa- gon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in... [click here for more] |
Decagon Design |
Pay What You Want
|
Make your combats more epic!
Rising and falling battlefields are the herald of great movie battle scenes. But when you've got a flat base on a miniature, they tend to fall flat (or down the stairs).
The included adapter allows large-based miniatures to hold their ground on the stair cases present in the majority of Fat Dragon Games' amazing sets. Included pictures showcase the Dungeon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Need some spellcaster NPCs for your game? Well here there are!
In this collection you get the following models:
- Acolyte
- Cultist
- Cult Fanatic
- Mage
- Priest
- Druid
- Elf wizard with staff and wand
- Dwarf Wizard
- Dwarf Cleric
- Archmage
Print with supports and a brim or raft. Prints well on their backs.... [click here for more] |
mz4250 |
Pay What You Want
|
Dwarves of every class now ready for 3D printing! In this collection I have:
- Fighter
- Female Cleric
- Barbarian
- Wizard
- Rogue
- Bard
- Paladin
- Psion / Sorceror.
Along with each mini I have their corresponding weapons. Print them with supports and a raft. . Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|
Included are three 2x2 dungeon floor tiles:
2x2 with center dungeon stone wall
2x2 with center dungeon stone wall and edge stone wall (T intersection)
2x2 with center dungeon stone rectangle door base
In order to use the door, you will need to own a rectangle Door, Door Hinge, Door Lintel, and Door Plug which can be found in a number of Fat Dragon Games sets here on DTRPG.
DRAGONLOCK Ultimate:... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a well that will be great in the centre of a town or castle (especially Sir Cireneg's Castle, you should get that too!)
It also comes with a tentacle because we all want tentacles coming out of the well don't we? ... [click here for more] |
Devious Games |
Pay What You Want
|
Need some mounts? Why not some horses? Here in this collection is a draft horse, riding horse, and warhorse.
Print the head as is. Print the body upside down with supports and a raft. Enjoy! ... [click here for more] |
mz4250 |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 52.5mm (2.1") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter.
All of my re-creation miniatures are pay-what-you-want... [click here for more] |
New Frontier Games |
Pay What You Want
|
OVERVIEW
The Flat-D Terrain System Starter Kit includes 3d STL files for 21 clips and several basic terrainpieces.
PAY WHAT YOU WANT
This starter set is set as "Pay What You Want", so feel free to pay as much or as little as you find value in the system.
CLIPS
You're granted a free license to print or have printed these clips in any amount of... [click here for more] |
PEI Development |
Pay What You Want
|
Space Ships 3 is the next in Will Walker's line of beloved space terrain. 50+ STL 3d printable files are included in this Core Set, including everything you need to make a magnificent space ship or station. This is one of our patron supported sets. Over 500 additional models available to our patrons. You can find a link to the Patreon included in the Readme.
Alien Terrain Sets Alien... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of pyramid tiles was a collaboration between myself and user @arenwel on the Fat Dragon Games forums. He is a true friend and I thank him so much for helping me get where I am now.
There are two different tilesets included in this 26 item title:
1) External, which sits flush to the table and each exterior tile for aesthetics. Connects to Fat Dragon titles on 3 sides.
2) Internal, which... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Looked in Gaoler Lous, and in Forum Prisons and couldnt find this, so I made it because I needed it, shared it in case someone else needed it. Does not include the doors, just the floors.
Doors and other walls can be found here:
https://www.drivethrurpg.com/product/242012/Best-of-the-Forums-Prison-Cells?term=forum+prison&test_epoch=0 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
The Megahexes 1.5” Expansion Set 2 has 20 3D-printable STL models that enhance the Megahexes 1.5” Base Set, adding overlay pieces for fire, shadow and stone spell effects, large terrain features, and water hexes.
The hexagons are 1.5” center-to-center, and the hexagon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in the set) requires... [click here for more] |
Decagon Design |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 135mm (5.3") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model... [click here for more] |
New Frontier Games |
Pay What You Want
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This contains 2 files, a lean to to lean up against a building or wall and logs to go underneath it or elsewhere. ... [click here for more] |
Devious Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. On the old Federation Ships box that included the mini, this model was labeled "some assembly required" and it came in 10 different pieces (2 for the fuselage and 8 engines). The model provided has them all combined into a single piece.
It was produced at the same scale as the original minature... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a collection of three different assault scout models
AssaultScoutMini-fn30.stl - This is a recreation of the the original UPF Assault Scout miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 20mm (0.8") tall when printed. It was originally designed for FDM printing and so has a low poly... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. On the old Federation Ships box that included the mini, this model was labeled as a Destroyer but, based on it's size and armament, makes more sense as the Light Cruiser and so has been labeled as such.
It was produced at the same scale as the original minature and stands 94mm (3.7") tall when... [click here for more] |
New Frontier Games |
Pay What You Want
|
Unleash a horde of undead with this Zombie collection! This includes a zombie human and ogre model.
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A 3d Printable game organizer origianlly created for for Darkfast Dungeons. This set could also be used for many other games that use cards and tokens.
includes:
3x3 token tray
1x3 token tray
card organizer with 4 token slots
character dash board
2x5 card organizer for 35mm square cards/tiles
1x2 organizer for 3x3" dungeon tiles ... [click here for more] |
Middle Kingdoms Adventure & Trading Co. |
Pay What You Want
|
Need some familiars printed? Maybe a rat or two? Here they are!
This is a collection of very small animals you can use in your campagin! Cats, rats, weasels, jackels, and more!
Print them with supports and a raft. Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|
This is a remix for the Tower of Terror set for integrating into the Woodland Sets. This does not include the rest of the tower. It only includes the door and 4 tiles shown in the cover preview. Enjoy!
This requires the purchase of the FDG Tower of Terror set to complete tower.
Recommended Print Settings:
Use official FDG Printing Profiles
Layer Height: .2
Infill: 5% ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set of 3D-printable terrain and miniatures, Pharaoh 6, was made by all of the Aether Studios artists together. Everyone contributed to this set, with Tia making the first textures, Jake making the animals, Colin with the Ram, Jeromy with scatter, Will and Nasos with the rest. Pharaoh has long been a collaborative experience and this set is the paragon of our progress so far. We hope you enjoy... [click here for more] |
Aether Studios |
Pay What You Want
|
The Promo Boreworm model is here! The interior is untextured, however there is a 2x6 interior usable area.
Print the 'bottom' sections using supports, tree supports recommended.
The holes in the Boreworm and base are 10mm, for those wanting to use acrylic dowels. Printable ones are present in the package.
Enjoy this sample of Dragon Workshop's 3d printable terrain.
These files are for personal... [click here for more] |
Dragon Workshop |
Pay What You Want
|
The Megahexes collection is a set of 22 3D-printable STL models designed for games needing a hex grid.
The hexagons are 1.75” center-to-center, and the hexagon sides are 1” long. All parts will fit on an Ender3 buildplate. A seven-hex “Megahex” requires a build footprint of 5” x 5.25”. The largest piece in the set, the rock bridge, is 8” x 5.25”.
The models make use of the Dragonbite... [click here for more] |
Decagon Design |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 50mm (2") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model usefor... [click here for more] |
New Frontier Games |
Pay What You Want
|
Realm of the Mountain King wall with geared lever and gem like found in DDO to open doors or activate effects. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
In this collection you get swarms of bats, rats, insects, ravens, and snakes!
Print them as is with supports and a raft. Print the stands with clear material if you can.... [click here for more] |
mz4250 |
Pay What You Want
|
Need some goblins? Hobgoblins? Bugbears? We got it all! Go to town on your players and tear them apart with these awesome goblin minis. Free and ready to print, just use supports and a brim on each piece. ... [click here for more] |
mz4250 |
Pay What You Want
|
Dungeon floor with a post in the middle. FDG Dungeon Starter and Expansion 7 have other versions of this tile. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 85mm (3.35") tallwhen printed. Tested on both FDM and SLA printers.
Here's a picture of the model printed with my SLA printer (the body was printed hollow as a test which is why it's not as dark as the bow of the ship). ... [click here for more] |
New Frontier Games |
Pay What You Want
|
A Skeletons of a human warrior, minotaur, and war horse, now ready for your tabletop game!
Print with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|
This is a small remix of Tom's Miniature Painting Holder. I made a 1 piece new handle & a screw top for the two piece. A taller old style that takes a Dragonbite Clip, a tall old style with a 5mm X 3 mm hole for a magnet to use with the 1 and 5 mini holder tops I made or you can just glue the top of your choice. I also made the pins on the new necks a little smaller for a better fit and I shaved... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Curved wall with castle floor. Done at Julie Hanson's request. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 25mm (1) tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. It still has its printing supports attached. The download file has a smoother surface than the... [click here for more] |
New Frontier Games |
Pay What You Want
|
Included is a 2x2 castle floor tile with the secret door wall base from DRAGONLOCK Ultimate: Dungeon Expansion Set 1.
In order to use this product, you will need to own one of the Wall_Secret_Top files from DRAGONLOCK Ultimate: Dungeon Expansion Set 1, which can be found here:
https://www.drivethrurpg.com/product/170650/DRAGONLOCK-Ultimate-Dungeon-Expansion-Set-1
DRAGONLOCK... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Fat Dragon Games' 3D printable mini painting holders are great — but they don't grip hex-base minis, or the circular Heroforge bases, as well as they could. This set of alternate slider models is compatible with the standard FDG mini painting handles, but gives a bit of extra grip.
Slider-grips for 1", 1.5", and 2" minis are included. This product requires the handle and base models from Fat Dragon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Aztlan Starter is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and this introductory set will give you everything you need to get started making dungeons. This set includes a unique floor, door, and stairs models not found in other sets. It is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the... [click here for more] |
Aether Studios |
Pay What You Want
|
Terry wanted one of these, so i took a crack at it. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 40mm (1.56") tall when printed and is 48mm (1.9") wide. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother... [click here for more] |
New Frontier Games |
Pay What You Want
|
3D printable / digital files only
1. For personal use only.
- selling or sharing of STL / digital files is prohibited
- sharing of download link is prohibited
- sharing, molding & casting of prints is prohibited
- altering my digital sculpt & calling it as yours is prohibited (slice & scale is ok)
- using my digital sculpts or part of it to make new content is prohibited
- sharing... [click here for more] |
Porc Skullpt IX |
Pay What You Want
|
A 3d-printable set of the seven dice (d4, d6, d8, d10, d12, d20, d100) useable for most games. This set used the 'Duen Rise' font for the faces
There are 2 sets of dice with different edge styles. The first is with a clean hard edge and the other has a small bevel. Both styles have supported versions.
Note: for personal use and 3d printing for re-sale is allowed.... [click here for more] |
Impossible Emporium |
Pay What You Want
|
Whats a tabletop game without some bears?!
In this collection you get a black, brown, polar, and dire bear, ready to make your forest encounters un...BEARable!
(sorry that was terrible)
Print them with supports and a raft. Enjoy!... [click here for more] |
mz4250 |
Pay What You Want
|