Title |
Publisher |
Price |
Included in this title are 12 remixed tiles for Fat Dragon Games Caverns Terrain.
4x4 Elevated Cavern Floor
4x4 Crater
4x4 Elevated Crater
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Ledged Rock
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Formation Rock
4x4 Water tile with Rock Formation
4x4 Water Tile with Ledged Rock
4x4 Water Tile with Rock Hut Bottom... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 34 STL files corresponding to the status effects of the 5th Edition Dungeons and Dragons game.
Advantage, Charmed, Disadvantage, Deafened, Fatigued, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned, Unconscious, Exhuasted Dying, Stabilized, Save, Fail, Misfire, and Concentrating are included. Flying 5, 10, 15, 20,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
These 2x2 risers are designed to support the 4x4 Woodland and Riverside sets, including the new Riverside Waterfalls Set. Some of the cliffs and falls have unique heights. This set should provide proper support with any combination. These risers should support most FDG 4x4 tiles.
See Preview Here:
Recommended Print Settings are .2mm layer height and 10% infill, using the FDG terrain profile.
Cheers!... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 9 custom remixed tiles combining elements from Fat Dragon Games Starter set, Expansion 9, and Villiage 1 set. These doors were requested by my friend @ammulder on the FDG Forums for use as "secret" doors that are clearly visible from one side. They are free to the community in celebration of Fat Dragon Games Kickstarter 3.
Each door tile prints in one solid piece and will... [click here for more] |
Fat Dragon Games |
$0.99
|
Add the ever-popular Intermodal Shipping Container to your tabletop scenery with Nerdhaus Industry's 3D printable starter pack. It includes everything you need to build 10, 20, 40, and even 60ft shipping containers for heroic-scale tabletop games in modern, sci-fi, and post-apocalyptic settings.
Assemble individual containers for use as scatter terrain, stack them to build a wasteland fortress of... [click here for more] |
Nerdhaus Industries |
$9.99
|
Choice Caverns includes 4 new 2x2 remixed cavern tiles and 1 oversized 4x6 Cavern Chasm. I made each of these for my patrons in October 2018, so it seems fitting to call them Choice. These were remixed from the Fat Dragon Games Revised Caverns terrain set. ... [click here for more] |
Fat Dragon Games |
$2.99
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
This set is for those in the Facebook Group that asked for Wrap around Porches/Balconies
The set comes in 3 different styles and all have railings for each section with corner sections needing 2 corner railings to complete.
there is 25 items in this set, update: added extended bumpout with roof, 2 versions of chairs one will need a piece of cloth to be added (caution chairs are very small and... [click here for more] |
Fat Dragon Games |
$3.00
|
Complete collection of 3 and 4 inch rooftops from Village Timber set. Cover photo courtesy of Tim Thorpe, who also inspired the need for this set. ... [click here for more] |
Fat Dragon Games |
$4.99
|
Galactic Carrier is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Figures are... [click here for more] |
Tabletop Terrain |
$6.50
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
There are 7 new doors in this set that are compatible with FDG Castles and Towers of Terror.
-Solid Iron Door
-Distressed Solid Iron Door
-Barred Window Iron Door
-Distressed Barred Window Iron Door
-Barred Iron Door
-Distressed Barred Iron Door
-Broken Wooden Door
-Unique Hinge that works with these doors, and FDG doors
These doors will not fit on the regular FDG hinge, but the FDG doors... [click here for more] |
Fat Dragon Games |
$2.00
|
I am excited to offer the Burrows Core Set. A set of underground tunnels perfect for giant ants, worms, kobolds, spiders, snakes and other burrowing creatures has been a long time desire of mine that I am happy to share. The set includes 2x2 and 2x4 tunnels, reconstructed chambers, and all the usual 2x2 walls and corners to construct your own chambers. Enjoy!
Preview:
:lang="en">Burrows Core Set... [click here for more] |
Fat Dragon Games |
$19.99
|
Garbage Truck is a collection of 3D printable files that build a detailed Garbage Truck vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used as terrain for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Knight Models Batman Miniature Game, Corvus Bellis... [click here for more] |
Tabletop Terrain |
$5.80
|
Busy Little Dwarves Expo #2 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansions not already represented in the Realm of the Mountain King set, or the various Busy Little Dwarves titles.
It includes the files seen in the viewer and listed below:
2x2 Dwarven Floor 2
2x4 Dwarven Floor 2
4x4 Dwarven Floor
4x4 Dwarven Floor 2
2x2 Dwarven Wall Hole
2x2 Dwarven Well (empty)
2x2... [click here for more] |
Fat Dragon Games |
$10.99
|
Looking to add some snazzy scatter terrain to your modern or near-future tabletop games? These high-resolution models will fit into any warehouse, construction site, or shipping hub you throw them at.
Currently included:
Cinder blocks
Wooden pallets
55 gallon drums (open and closed)
Large-sized cable reels (with split version for no-support printing)
Pallets stacked with 55-gallon drums and cinder... [click here for more] |
Nerdhaus Industries |
$2.99
|
If you are like me, then you love LED tiles and how they bring a dungeon to life! I am excited to introduce this series of LED Cavern Tiles. The set includes a variety of Walls and a variety of tiles. LED elements include crystals, lanterns, torches, and braziers. Check out the previews! If you are familiar with the FDG Torch Wall, then you will have no trouble with these. Enjoy!
Check out the expansion... [click here for more] |
Fat Dragon Games |
$14.99
|
I am happy to provide the first expansion to the Burrows Core Set. This set includes burrow holes for multi-level transitions, root obstacles, and burrow holes and transitions for other popular FDG and Community themes including Cavern, Dungeon, Sewer, Dwarven, Village, and Forest floors! Enjoy!
:lang="en">Burrow Entrances & Transitions Set
For best quality prints, use the FDG terrain profile... [click here for more] |
Fat Dragon Games |
$14.99
|
Populate your Sewer system, swampy area or any dungeon with these slimy bastards and give your gamers new exciting and slayable enemies. Print "up" as many leeches as you please and resize them to get a more diverse swarm!
No printing supports needed! We’ve printed these minis with a Printrbot Simple Metal using a 4mm printing tip. Settings: Layer: 100 micron, print speed 25, infill 20%, PLA... [click here for more] |
Black Scrolls Games |
$5.95
|
I am excited to share this set! I wanted to create a variation to the existing narrow cavern tiles. These narrow passages are a bit more accessible and easier for players to see the battlefield. It includes, 45 degree, Y and X intersections to create a more interesting cavern path in additional to the traditional intersection tiles. I added some elevation passage tiles as well as a bridge that sits... [click here for more] |
Fat Dragon Games |
$9.99
|
An expansion set for the posts of village buildings 1 and 2 with some pillars included this set contains wooden and stone Double posts in many different combinations as well as a Pillar for both wood and stone.
This set contains 20 variations of posts and pillars
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$2.50
|
I am really excited about this set. It includes planks, stairs, and ladders for the cavern deck sets, but most of all the bridges! Rope bridges of varying lengths, and perhaps the most exciting, diagonal bridges. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Bridges & Accessories
Recommended print settings are to use the FDG terrain profile at .12 layer height or better,... [click here for more] |
Fat Dragon Games |
$9.99
|
Need more Extras, allies, or enemies (even just as innocent bystanders) but don’t want to say the 3rd dime from the left (who’s left?) or the soda cap near my player? We have you covered!
These are numbered square Tokens 3D print files designed for compatibility with Savage Worlds to be used as Extras. Can be used as Objective markers.
You will be getting a 3D STL digital file to... [click here for more] |
Pinnacle Entertainment |
$1.00
|
This set expands the options for the village street sets to include 4x4 wide street options, in disrepair streets and sidewalks, and a special street culvert. The goal was to provide more variation to the fantastic FDG village street tiles. Enjoy!
Preview:
Village Street Options
For best quality prints, use the FDG terrain profile at .2mm or better height. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
These racks will hold your FDG minis for transportation, and stack to take up less shelf space. Non-locking versions are also included. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Bill requested some four inch doorways. Here are 4 variations. Regular Flat Wall, Left Corner, Right Corner, Two Corners. Each piece contains an optional center clip space, where you can run a narrow passageway off from it if you'd like. ... [click here for more] |
Fat Dragon Games |
$1.00
|
Cyberpunk Compact Car is a collection of 3D printable files that build a detailed sci-fi street vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used as terrain for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many... [click here for more] |
Tabletop Terrain |
$5.50
|
This is an add-on set for the Fat Dragon Games Tavern Sets. This set includes five support posts, an empty tiny shelf and a tiny shelf with a candle that can be attached to the posts via pegs or to any village or tavern walls with peg holes in them.
These posts can support the weight of three to five tiles, clipped together, on top of them and will support a future rafter set.
You can find Dragonbite... [click here for more] |
Fat Dragon Games |
$2.99
|
Included in this set are 20 remixed files for Fat Dragon Games Tower of Terror 3d terrain set. You'll need that base set to make full use of these tiles.
These tiles will help you connect to other FDG dungeon terrain models and add variation to your existing towers.
... [click here for more] |
Fat Dragon Games |
$6.99
|
This is a collection of one inch by one inch dungeon tiles that use modified Dragonlock Clips to clip together. Sometimes you have to build a HUGE dungeon that could take up three 4X8 tables if you did it to scale. With these, you could fit that dungeon on your dining room table, and still have room for character sheets.
Maybe you are into OSR games with huge sprawling dungeons, or you prefer pen... [click here for more] |
Fat Dragon Games |
$4.95
|
This Set includes the tavern base tile to create a trapdoor using either the metal frame and standard trapdoor (as pictured on the right) from the FDG Tower of Terror set* or using the wooden frame and hidden trapdoor included in this set (shown on the left).
The hidden trapdoor has hinges and a handle on only one side of the door so when flipped over it appears as a standard tavern floor.
*The... [click here for more] |
Fat Dragon Games |
$1.99
|
Here you will find all of the models released via our Patreon in January 2024 Patreon. members can get all of our monthly releases at a discounted rate. If you like this set please check out our Patreon here https://www.patreon.com/user?u=89784988
nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities.... [click here for more] |
nonPareil |
$5.00
|
This set of tiles was drafted for construction by my patrons. Included are 57 3d models that are compatible with the FDG Cavern Mines. There are also 50 more models for the original legacy cave tracks set, as well as a transition tile between to the two sets. There is also an awesome mine cart by Aether Studios artist Jacob Armour.
... [click here for more] |
Fat Dragon Games |
$24.99
|
In this pack you will find six new textured bases, five buildings, three 7-hex terrain pieces, and two nuclear explosions. Each model in this pack comes with supported versions.
These models can find a great home in your games of Battletech, AT, Polyversal, or any other 6mm/8mm sci-fi tabletop wargame.
Some models created through use of Standard License with Oleg Ushenok.
One or more textures on... [click here for more] |
nonPareil |
$1.00
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the core set that has treasure only tiles and compliments the other treasure sets that I made, which include Dungeon, Cavern, and coming soon the Dwarven themes.
This set includes 28 unique tiles that include floor tiles, piles, elevations and elevated piles! You... [click here for more] |
Fat Dragon Games |
$9.99
|
This Necromancer's Ship is fully modular, with tons of customization capability and full, incredibly detailed interior play space. Over 150 components to make your Necromancer's ship the scourge of your tabletop seas. From weapons to tons of decking and hull options. Choose your number of masts, length and layout!
Thank you for supporting small artists!! These models are for personal non-redistributable... [click here for more] |
Dragon Workshop |
$19.00 $11.40
|
I am really excited to share these LED Dungeon tiles. This is a first set of many to come. If you are familiar with the original FDG LED Torch Wall, then these will be a no brainer to assemble. This set includes a variety of tiles including an angled torch wall, scrying pool and a variety of braziers. Check out the previews!
... [click here for more] |
Fat Dragon Games |
$14.99
|
Here you will find all of the models released via our Patreon in December 2023. Patreon members can get all of our monthly releases at a discounted rate. If you like this set please check out our Patreon here https://www.patreon.com/user?u=89784988
nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement... [click here for more] |
nonPareil |
$5.00
|
This set includes some the earliest work from the Fat Dragon Community Crafters. This 44 item set contains everything you need to build Dragonlock Ships with masts, rails, and cannon decks.
Originally crafted by Squirrelhammer and later updated by Arenwel, this set represents the very best spirit of the FDG crafting community: Working together, inspiring each other, and sharing the benefits with... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are all the files seen in the 3d viewer below. These include a number of variations of walls, floors, and corners that make up the Space Ships One base set. This set began as a rough idea that was brought into life by a wonderful person named Smiles. She helped shape this set from the very beginning with ideas and encouragement. I consider her my co-artist on this set, and she... [click here for more] |
Fat Dragon Games |
$9.99
|
The Cobbled Bases are great if you want to see what the texture of the Cobbled Roads for Lord Cireneg's City are like. They are pieces cut from the same tiles so they will match the look perfectly. Solely made with cobble stones so you can add your own details as you wish. ... [click here for more] |
Devious Games |
Pay What You Want
|
Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games!
Please see the included ReadMe for print instructions.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
4 Floors of 4 inch tower. One flight of stairs, door and lintel. ... [click here for more] |
Fat Dragon Games |
$4.99
|